Die Cast Aluminum Zinc Alloy

cable connecting head for electric connector

USD 0.8 / Piece/Pieces

There are many ways to preheat the die-casting mould. Generally, gas injection, blowtorch, electric heater or induction heating are used in continuous production. The temperature of the die-casting mould tends to rise continuously, especially when...

Custom cable connector die casting

USD 0.8 / Piece/Pieces

In the process of aluminum alloy die-casting, the mixture of lubricant release agent sprayed on the mold cavity, core surface, sliding block, push out element, punch and pressure chamber of aluminum alloy die-casting machine is generally referred to...

Wholesale Aluminum alloy precision die casting part

USD 0.8 / Piece/Pieces

Theory of Full Wall Thickness Filling in Aluminum Alloy Die Casting The theory of full wall thickness filling in aluminum alloy die casting was developed by Brandt in 1937 using aluminum alloy to press into an experimental die casting mold. The test...

Aluminum alloy precision die casting part

USD 0.8 / Piece/Pieces

Under the normal die-casting conditions, the jet and jet flow die-casting machine presses the metal into the ordinary die-casting model cavity. At the initial stage, the metal liquid passing through the inner gate is directly shot forward at a high...

Aluminum alloy die casting product

USD 0.8 / Piece/Pieces

Shrinkage occurs when the temperature of molten metal decreases. When the temperature of molten metal decreases, the surface and internal temperatures do not decrease at the same time. The surface layer of molten metal cools very quickly, and then...

Aluminum alloy die casting custom

USD 0.8 / Piece/Pieces

Theory of Spray Filling for Aluminum Alloy Die Casting The theory of spray filling in aluminum alloy die casting was proposed by Frommer in 1932 based on practical experience in zinc alloy die casting and through a large number of experiments....

Anodized color aluminum alloy part process

USD 0.8 / Piece/Pieces

Three stage filling morphology In the first stage, after the metal flow limited by the area of the inner gate is injected into the mold cavity, it first impinges on the opposite mold wall, extending in all directions along the mold surface. When the...

High quality Aluminum alloy die casting bracket

USD 0.8 / Piece/Pieces

Basic Principles of Cold Chamber Aluminum Alloy Die Casting Process The pressure chamber of cold chamber die casting is separate from the holding furnace (alloy melting and exhaustion). During aluminum alloy die casting, first use a quantitative...

Zinc alloy die casting metal product

USD 0.8 / Piece/Pieces

Define the task The task statement for aluminum alloy die castings is usually proposed by the part designer, and the task statement for aluminum alloy mold design is usually proposed by the aluminum alloy die casting part technician based on the...

ATM money box handle require

USD 0.8 / Piece/Pieces

Draft the overall plan for the mold structure First of all, it is necessary to determine the position of aluminum alloy die castings in the mold, including the selection of parting surfaces, the number of cavities, and parting. Determine the pouring...

Purchase Aluminum alloy automobile engine part

USD 0.8 / Piece/Pieces

With the development of new energy vehicles and the electronic industry, the working speed of electronic components is increasing day by day, and correspondingly, the heat generated by them is also increasing. In order to enable electronic...

Aluminum alloy die casting smart lock part

USD 0.8 / Piece/Pieces

In order to obtain high thermal fatigue resistance and wear resistance, aluminum alloy die casting molds must have high high-temperature strength and tempering stability. Adopting optimized Heat treatment process, without decarburization,...