Electric Cable Connector

Appliance convenient electric cable connector

USD 0.8 / Piece/Pieces

The special feature of oxygen filling die casting eliminates or reduces the air holes inside the die casting, and improves the quality of the die casting. The strength of aluminum alloy die castings after oxygen filling is 0% higher than that of...

Appliance convenient electric connector

USD 0.8 / Piece/Pieces

Oxygen-filled die-casting is only applicable to aluminum alloy die-casting. The so-called oxygen-filled die-casting refers to filling the dry explosion oxygen into the chamber and the die-casting mold cavity to replace the air and other gases in it,...

cable connecting head for electric connector

USD 0.8 / Piece/Pieces

There are many ways to preheat the die-casting mould. Generally, gas injection, blowtorch, electric heater or induction heating are used in continuous production. The temperature of the die-casting mould tends to rise continuously, especially when...

custom type head for electric connector

USD 0.8 / Piece/Pieces

The connector head of a connector is a very important component of the connector, which is necessary for connecting devices. The connectors manufactured by aluminum alloy die-casting process are the most common and are mostly used in fields such as...

Electrophoresis octagonal disc connector housing

USD 0.8 / Piece/Pieces

Electrophoresis is a commonly used coating process, which is also commonly used for Aluminum Alloy Die casting parts. It generates ions by dissolving organic substances in a liquid and causing the ion components to precipitate on the charged...

Communication equipment cable connector

USD 0.8 / Piece/Pieces

The requirements of aluminum alloy die-casting for coating: 1. It has good lubricity under high temperature; 2. Its volatile point is low. At 100~150 ° C, the diluent can volatilize quickly. 3. The coating property is good. 4. It has no corrosive...

cable clamper for electic connector

USD 0.8 / Piece/Pieces

Water-cooled motor and electric control system are built with water pipes. The coolant flows through the motor and electric control device to take away heat, and enters the radiator of the water tank to dissipate heat. The electric fan and radiator...

high quality cable connector with pin

USD 0.8 / Piece/Pieces

The injection force comes from the high-pressure pump, which is the force pushing the injection piston in the injection mechanism of the die-casting machine. Its size varies with the specifications of the die-casting machine. During die casting, the...

Custom cable connector die casting

USD 0.8 / Piece/Pieces

In the process of aluminum alloy die-casting, the mixture of lubricant release agent sprayed on the mold cavity, core surface, sliding block, push out element, punch and pressure chamber of aluminum alloy die-casting machine is generally referred to...

custom pin cable connector

USD 0.8 / Piece/Pieces

Slow injection speed of aluminum alloy die-casting The speed at which the aluminum alloy die-casting injection punch starts to move until the molten metal in the chamber is sent into the inner gate. In this stage, it is required to fill the pressure...

Professional cable connector die casting

USD 0.8 / Piece/Pieces

In the process of aluminum alloy die-casting, the time for liquid metal to fill the mold cavity under high pressure and high speed is very short, generally only a fraction of a second. The initial stage is complete injection, and then in a short...

cheaper price cable connector with pin

USD 0.8 / Piece/Pieces

Sensor is the core component of automobile electronic control system, which is widely used in automobile power, drive and ξ System. The sensor can actually control the position, temperature, humidity, image, acceleration and electromagnetic...